How Do You Fill Fresh Water Tank In An RV

Nov. 4 2021 RV's By Sophia James

There's a lot to learn about your travel trailer or motor home as a new RVer. While doing is the best way to learn, doing some research before going in head first is also helpful. In Arkansas, Alabama, and Tennessee, our company can offer Jayco, pontoon boat, and wave runner for sale. Our Airstreams are free from any fault. There are a few things that a traveler has to handle by himself. The RV freshwater tank is one of the essential systems on your trailer;

  • Rent a recreational vehicle.
  • Put your RV on the market.

Every camper is a little different, but the majority of them would have a freshwater tank. When you're not connected to an outside water source, you'll utilize this handy system for a drink, cook, do dishes, shower, and use the toilet. It is important that you learn how to fill and maintain the freshwater tank.


How do you fill the freshwater tank in an RV?

If you aren't using a hook-up at your campsite, using your water tank will come in handy. However, a freshwater tank is useless until it is filled with water!


Separation of RV Hoses

Before you start hunting for your freshwater fill valve, there's one thing you need to understand: separate hoses. A hose devoted solely to your freshwater system should be installed. This hose should not be used to clean a septic hose or to wash your RV. The majority of freshwater hoses are white. However, some are blue. Keep it separate from your drinking water to avoid infection.


Step 1: Find the Intake Valve.

Connect a hose to the new fluid intake valve once you've designated one just for drinking water/freshwater. Connect the hose's other end to your water spigot. You can pull the lever shown below to fill or bypass the water tank when you're connected up at a campsite. If your tank has a lever, check sure it's open to let water in. if you are finding any difficulty, you can contact with professional RV dealer in your town.


Step 2: Keep a close eye on the water level gauge.

Locate your tank indicators inside your car before opening the spigot. Remember that tank indicators are often unreliable, and checking how full your tank is visually is always more accurate than using one. If you can, try to get a visual reading on your tank. If you don't have a visual, use the tank indicators on your RV's panel to alert you when the water tank is getting close to being complete.


Fill Up!' is the third step.

Fill it up by switching on the hose from the source.

Depending on the size of your freshwater tank, you may want to consider filling it. Because water weighs almost 8 pounds per gallon, it can add a significant amount of weight to your trailer as you move down the road. A full tank might be a good idea if you're going to a boondocking spot where there won't be any water.


If you're going to a great national park campsite with water and electricity, you'll probably only need enough fresh water to drink, cook, and use the restroom until you get there. Make preparations ahead of time. Make sure you're outside your vehicle with plenty of time to turn off the faucet when the tank is nearly full. It's always not a good idea to overfill the tank. Unhook the line and store it away from your septic hoses with the tank valve set to "tank fill." It's best to keep them in entirely different compartments if at all possible.


Using a Water Pump in an RV

A little understanding about your water pump is included in a lecture on water use in your motor home or travel trailer. You don't need to be connected to shore power because your pump can run on a battery. A circuit to turn on and off water pump is located somewhere within your car.

If you're using your RV's water tank, ensure sure the pump is turned on. When the pump is turned on, you will hear it whenever you turn on the water in your car, such as when you run the tap or flush the toilet. When you turn off the faucet or when the toilet is flushed, it will stop running. If you hear it when your rig is not filled with water, you may have a leak someplace.


Cleaning the Fresh Water Tank in Your RV

When water is held for a long time, it can develop an odor. If this is the case, drain the freshwater tank and flush your system with water containing a tiny amount of bleach. There should be a drain near the freshwater intake valve that permits the freshwater tank to drain on the ground before replenishing it.

Southaven MS is only working for the betterment of Airstream, Jetski, and Boat. We have a wide range of RV dealers to offer to all travelers. Our company also gives affordable packages according to the demands of the client.